Subscribe
1280 W Bayaud Ave
Denver, CO 80223
303.733.3013

30 November 2011

Twitter Updates for 2011-11-30

Filed under: Production Updates — Tags: , , , , , , , — Mike Michaelson @ 23:55 MDT
  • Loading the truck up for an install today. #
  • The Mt Falcon “Firetower” bathroom is almost complete. Just need to grout & clean up (load up our tools & move extra tiles to storage). #
  • Running a @Kohler 3821 Vault sst under-mount sink cutout in 3cm Costa Esmeralda #granite on the CNC now. #
  • Programming the 2nd of 2 Jurrasic Gold vanities now. This one is a Banjo style with a FBN edge & a DecoLav 1403 under-mount sink. #
  • Replacing a pair of T8 fluorescent light electronic ballasts in 2 fixtures in R other office next door. #maintenance #
  • Running a Dupont edge detail on a Jet Mist #granite bar top. It is the last piece for a large job up in Niwot. We will be installing it Fri. #
  • Hand finishing the Costa Esmeralda #granite laundry room tops that we will be installing on Friday. #

Powered by Twitter Tools

29 November 2011

Twitter Updates for 2011-11-29

Filed under: Production Updates — Tags: , , , , , — Mike Michaelson @ 23:55 MDT
  • Cutting a laundry top out of 3cm polished Costa Esmerelda #granite The edge detail is an Eased & Polish & it has a @Kohler 3821 sink in it. #
  • Running the 2nd of 3pcs of Crema Bordeaux #granite on the CNC. Just running a Dupont edge detail on this piece. There is a sink in the 3rd. #
  • Making some more template for jobs to be cut. #
  • Cutting a piece of Jet Mist #granite for a bar counter. It will be getting a Dupont edge detail too. #
  • Running the last piece of Crema Bordeaux #granite It has a Franke VNX-120-37 undermount sink cutout and a Dupont edge detail. #
  • Just flipped over the White Delicatus #granite island so the bottom of the edge detail can be hand finished. Almost finished. #

Powered by Twitter Tools

28 November 2011

Twitter Updates for 2011-11-28

Filed under: Production Updates — Tags: , , , , , — Mike Michaelson @ 23:55 MDT
  • Hope everyone had a Happy Thanksgiving & a relaxing weekend! :) #
  • Compressor blew out the oil filter at the end of the day Wed. Picking up a new one now to get up and running again. #
  • Air compressor is up & running (just didn’t have time to tweet it earlier). #
  • White Delicatus #granite island with a OG Bullnose & Julien Classic Collection 3232 sink cutout is off the CNC & being hand finished now. #
  • Running the 1st of 3 pcs of Crema Bordeaux #granite with a Dupont edge. This piece will be cut into 3 smaller pieces after it is off the CNC #

Powered by Twitter Tools

23 November 2011

Twitter Updates for 2011-11-23

Filed under: Production Updates — Tags: , , , , , , , , — Mike Michaelson @ 23:55 MDT
  • Cutting samples of #leathered Durango #travertine #
  • Cutting some 18×18 pieces out of 3cm bush hammered Black Absolute #granite #
  • Just finishing the CNC program 4 the White Delicatus #granite island. Both the edge detail (OG Bullnose) & the sink cutout (Julien 3232). #
  • Cutting some Jurrasic Gold #granite vanities. #
  • Just started island on the CNC. Was hoping to start it before lunch, but had to re-program it first. #
  • Gluing the Crema Bordeaux #granite mitered apron on. It will be a shelf & backsplash behind a large @subzerowolf range. #
  • Happy Thanksgiving! Have a great extended weekend! We will be closing early @ 4pm today. Will re-open on Monday morning (11/28). #

Powered by Twitter Tools

22 November 2011

Twitter Updates for 2011-11-22

  • Cutting pieces of Crema Bordeaux #granite kitchen. Currently cutting the apron down from 3cm to ¾” thick. #
  • Hand finishing some of the pieces of the White Delicatus #granite kitchen. Working on the Ease & Polish edge detail. #
  • Just finished programming the White Delicatus #granite cooktop cutout piece. Time to start setting up the CNC to run it. #
  • Installing the #leathered Cafe Imperial #granite BBQ counters today. #
  • 2 guys are up at Mt. Falcon working in the “Firetower” bathroom. Got about a week or week and a half to go until it is finished. #
  • White Delicatus #granite cooktop piece is finished on the CNC, just gluing in 5/8″ sq tubing @ front rail for reinforcement. #
  • White Delicatus #granite island eating area has just been polished on the backside. That is part of a custom granite kitchen :) #
  • Programming the OG Bullnose edge on the White Delicatus #granite island top as well as a Julien Classic Collection 3232 sink cutout. #
  • cutting 2nd slab of Crema Bordeaux #granite for some kitchen counters. #
  • Just bush hammered a piece of Black Absolute #granite Will cut it tomorrow. #

Powered by Twitter Tools

21 November 2011

Twitter Updates for 2011-11-21

Filed under: Production Updates — Tags: , , , , , — Mike Michaelson @ 23:30 MDT
  • 4 guys out installing a pair of large Juperana Santa Cecilia #granite islands with a pair of lower desks tops too. #
  • Cutting 2 slabs of White Delicatus #granite 4 a kitchen. The island gets a OG Bullnose edge while the perimeter tops R Eased & Polished. #
  • Got some shop drawings done for some vanities. #
  • Started cutting Crema Bordeaux #granite for a kitchen. It is getting a Dupont edge detail. #

Powered by Twitter Tools

18 November 2011

Twitter Updates for 2011-11-18

Filed under: Production Updates — Tags: , , , , , , — Mike Michaelson @ 22:30 MDT
  • Disassembled White Carrara #marble block vanity that was in R showroom and starting to crate it up. Will be picked-up on Mon 2 go 2 Aspen. #
  • #leathered Sea Foam Green #granite undermount tub cutout is almost done in tub deck piece on CNC. #
  • TGIF! Really ready for this week to end. #
  • Crate is coming along for the polished White Carrara #marble block vanity that is going to Aspen next week. #

Powered by Twitter Tools

17 November 2011

Twitter Updates for 2011-11-17

Filed under: Production Updates — Tags: , , , , , , , , — Mike Michaelson @ 22:30 MDT
  • Flat polishing some pieces of #leathered Sea Foam Green #granite #
  • Two guys up at the Mt Falcon “Firetower” job today. Bathroom is coming along. #
  • Doing another template this morning. It is a couple of vanities with splash. #
  • Working on plotting some more templates. These R 4 a customer coming in this afternoon 2 do their slab layout on Crema Bordeaux #granite #
  • Cutting a piece of #honed White Carrara #marble that will need 2 B polished. It is 4 a shower seat that will be fabb’d as a 3-sided “box”. #
  • Setting up the CNC to run the #leathered Sea Foam Green #granite tub deck for an under-mount tub cutout. #

Powered by Twitter Tools

16 November 2011

Twitter Updates for 2011-11-16

Filed under: Production Updates — Tags: , , , , , , , — Mike Michaelson @ 22:30 MDT
  • Plotting some templates for customer layout on Friday. #
  • Loaded up the #honed Pietra De Cardoso #schist bar countertop for delivery (3rd party) to Crested Butte. #
  • Working on a faucet layout with a Franke VNX 120-37 sst under-mount sink. #
  • Have a couple installs scheduled for today. #
  • Cutting the #leathered Sea Foam Green #granite#

Powered by Twitter Tools

15 November 2011

Twitter Updates for 2011-11-15

Filed under: Production Updates — Tags: , , , , , , , — Mike Michaelson @ 22:30 MDT
  • #leathering a slab of Halila Gold #limestone Will be cutting a shower seat & curb out of it. #
  • Doing a couple templates today. #
  • Got a ½ day left cleaning a floor. Sound like the end user wants it replaced though. Glad that is not R responsibility (we did NOT install). #
  • #Leathering a slab of Sea Foam Green #granite #
  • Cutting the shower seat & curb out of the #leathered Halila Gold #limestone #
  • Picking up a remnant a customer found. The place she found it at didn’t want to fab it for her. Don’t know why they wouldn’t, but we will. #
  • Installing a #leathered Emperador Dark #marble shower bench this afternoon. #

Powered by Twitter Tools

Older Posts »
Follow

Get every new post delivered to your Inbox

Join other followers:

%d bloggers like this: