New Trends in Natural Stone

• fighting w/iOS IPSec VNP settings 4 @watchguardtech Firebox X10e-W. Followed instructions on @watchguardtech site, but no go on iPad. #
• Working on accessing Exchange on an iPad2. Opened the req’d ports on the @watchguardtech firewall, may B exchange settings I need 2 tweek. #

Powered by Twitter Tools

• Had a training session for the new copier/printer/scanner today. Moved all the paper, and now time to move the old printer. #
• Holiday Schedule part II: We will be closing @ noon tomorrow (12/30/11) & remain closed thru Mon (1/2/12). We will re-open on Tues (1/3/12) #
• cleaning up the office and getting together stuff to Craigslist. #

Powered by Twitter Tools

• Getting back into the groove of things after a few days off for Christmas. #
• Still cutting the #leathered Cambrian Black #granite kitchen counters that we started on yesterday. #
• Started #leathering the edge of the #leathered Cambrian Black #granite kitchen. #
• New copier has been delivered, just waiting for the tech to show up & set it up. #
• Just did a photo “mock-up” of an island. Has an upper & lower and the lower needs 3 pieces. Also has a sink as well as some butcher block. #
• Setting up an iPad & incorporating it in to business use. #
• Holding on the phone for “Customer Care” 4 @watchguardtech I’m 1st in QUEUE Renewed my Live Security licence on line, but can’t activate it. #
• New color copier is set-up & running. Can print & scan too Now to sell the old color printer… Old copier is going to the grave yard… #

Powered by Twitter Tools

• Starting the day with snow removal. #
• Running a #honed Halila Gold basement bar on the CNC. Sink is a Mirabella MIRUC 1517 stainless steel under-mount. #
• Continuing to work on re-polishing our showroom floor. It is Silver Travertine. #
• Polishing the back side of a 3cm Black Absolute #granite monument/sign. #
• Happy Holidays! We will be closing early tomorrow (Friday the 23rd) and will be closed Monday the 26th. We will re-open on Tues the 27th. #

Powered by Twitter Tools

• Installing the #leathered Seafoam Green #granite bathroom pcs today in Evergreen. It consists of a vanity, u/m tub deck, shelf & wall caps. #
• Touching up the edge of the 6′ dia table that is normally in our showroom. Will put it back once the floor is done being re-polished. #
• Programming a Villeroy & Boch Evana 6147 00 under-mount sink cutout in polished Negro Marquina #marble Edge detail is a 1″x¾” Bevel. #

Powered by Twitter Tools

• Ground, cleaned & honed the shop office floor yesterday, sealed it this morning. Showroom floor is next. #
• Ran a CAT5e cable from R wiring closet 2 where the copier goes. New copier is network ready. Hope 2 get it this week, but it might B next. #
• Re-polishing the Ø6′ Ubatuba/Blue Bahia table that is normally in R showroom. Had to move it to work on the floor, so… #
• Hand finishing on the #leathered Seafoam Green #granite vanity & tub deck that we will be installing tomorrow in Evergreen. #
• Working on piece of 2cm Negro Marquina #marble It is a 3pc powder bath with a raised center. Gluing the build-up strips on the edges now. #

Powered by Twitter Tools

• It’s the week before Christmas. Do you have all your holiday shopping done? How about those projects around the house before company comes? #
• Running the #leathered Seafoam Grean #granite under-mount tub cutout on the CNC. Finishing the program 4 the matching vanity sink cutouts. #
• Drove to Boulder, did a template & drove back already this morning. #

Powered by Twitter Tools

• TGIF! #
• Re-cutting the #leathered Seafoam Green #granite bathroom. The 1st slab we cut was not the 1 the customer had selected @ the supplier’s yard #
• Installed a banjo vanity with a semi-recessed vessel sink today. #
• #leathering the edges of the #leathered Seafoam Green #granite on R @parkindustries Pro Edge III #

Powered by Twitter Tools

• Programming a self-rimming (drop-in) sink cut-out in a piece of 3cm London Fog #quartzite for a powder vanity. #
• #Leathering a slab of Seafoam Green #granite will have customer come in for a slab layout later today or tomorrow. #
• working on some shop drawings for a couple customers. #

Powered by Twitter Tools

• Loading up for a couple installs today as well as a template at one of the locations. #
• OSHA is back today to do "monitoring". Both air quailty (silica dust) and noise levels. Last time they were here was in 2004. #safety #
• Have written 4 of 8 machine specific lock-out/tag-out procedures today. #OSHA #safety #

Powered by Twitter Tools