New Trends in Natural Stone

• Starting the day with snow removal. #
• Running a #honed Halila Gold basement bar on the CNC. Sink is a Mirabella MIRUC 1517 stainless steel under-mount. #
• Continuing to work on re-polishing our showroom floor. It is Silver Travertine. #
• Polishing the back side of a 3cm Black Absolute #granite monument/sign. #
• Happy Holidays! We will be closing early tomorrow (Friday the 23rd) and will be closed Monday the 26th. We will re-open on Tues the 27th. #

Powered by Twitter Tools

• Ground, cleaned & honed the shop office floor yesterday, sealed it this morning. Showroom floor is next. #
• Ran a CAT5e cable from R wiring closet 2 where the copier goes. New copier is network ready. Hope 2 get it this week, but it might B next. #
• Re-polishing the Ø6′ Ubatuba/Blue Bahia table that is normally in R showroom. Had to move it to work on the floor, so… #
• Hand finishing on the #leathered Seafoam Green #granite vanity & tub deck that we will be installing tomorrow in Evergreen. #
• Working on piece of 2cm Negro Marquina #marble It is a 3pc powder bath with a raised center. Gluing the build-up strips on the edges now. #

Powered by Twitter Tools

• Cutting samples of #leathered Durango #travertine #
• Cutting some 18×18 pieces out of 3cm bush hammered Black Absolute #granite #
• Just finishing the CNC program 4 the White Delicatus #granite island. Both the edge detail (OG Bullnose) & the sink cutout (Julien 3232). #
• Cutting some Jurrasic Gold #granite vanities. #
• Just started island on the CNC. Was hoping to start it before lunch, but had to re-program it first. #
• Gluing the Crema Bordeaux #granite mitered apron on. It will be a shelf & backsplash behind a large @subzerowolf range. #
• Happy Thanksgiving! Have a great extended weekend! We will be closing early @ 4pm today. Will re-open on Monday morning (11/28). #

Powered by Twitter Tools

• Couple guys went to finish installing #honed Red Onyx pieces & #hone Torreon #travertine tub deck splashes. #
• 2 guys R starting a kitchen tear out 2day so we can install the #honed Calcutta Eureka #marble countertops & measure for full height splash. #
• Got R #honed Rosemary @CaesarStone slabs back from @PercocoSFC & they look really nice with the honed finish. Thanx Nick! #

Powered by Twitter Tools

• Customer added some splash @ tub deck, so just cut some 4″ tall pieces (50″-60″ long) of 3cm #honed Torreon #travertine down to ¾” thick. #
• Flat polishing the edge on the last piece of New Venetian Gold #granite (not counting splash). This piece is left of the stove. #
• #honed Graphite #marble fireplace pieces are ready for assembly tomorrow. #

Powered by Twitter Tools

• Cutting a crystallized glass slab for a vanity display and samples. #
• Finished cutting the #leathered Botticino Chroma kitchen this morning, now leathering the edges. #
• Programmed a DecoLav cut out in a 2cm Juperana Columbo #granite vanity with a 4cm FBN edge. #
• Programming the Julien 003919 sink cut-out in the #leathered Botticino Chroma. #
• Cutting some more pieces of Polar White #marble #
• Working on a #honed Torreon #travertine & #honed Red Onyx tub face. #

Powered by Twitter Tools

• Got a couple of installs today – 1st R the honed Torreon #travertine vanity & honed Red Onyx curb & jamb pcs. #
• 2nd (install) is a Polar White #marble curb, jamb & casing pieces. #
• Just got the faucet info 4 the Minerva @SilestoneUSA vanity & Calcutta Gold #marble vanity. Both counter tops get @Kohler Caxton 2210 sinks. #
• One of our fabricators is working on finishing the 2cm Infinty @Durcon_Inc kitchen counter tops. #
• Just received a slab of vein cut polished Torreon #travertine from @ArizonaTile for a job we are doing in Evergreen. #

Powered by Twitter Tools

• Cutting #leathered Ubatuba #granite for another package kitchen -> http://t.co/i7yXLa0 #
• Running Noche vanity with 2 @Kohler 2209 Caxton sink cutouts. #
• Working on shop drawings for #honed Red Onyx shower jamb pieces and shower wall center piece. #
• #leathering 2nd of 3 slabs of Nordic Black #granite #
• #leathering 3rd of 3 slabs of Nordic Black #granite #
• #leathering the edges on the Ubatuba slab package kitchen as the pieces are coming off the saw. #
• Re-polished a piece of 2cm Calcutta Gold #marble for a wedding cake platter. #
• Just ran 2cm Calcutta Gold #marble wedding cake platter on CNC. Ø16″ for a Ø14″ cake. #
• Just programmed the raised peninsula top for the #leathered Ubatuba #granite slab package kitchen. #
• Running #leathered Ubatuba #granite peninsula on CNC now. Rest of job is done being cut & mostly done being edged on the Pro Edge III #
• Honed Noche #travertine double vanity is almost finished & ready for install. #

Powered by Twitter Tools

• Cut a piece of Noche #travertine Needs to be re-honed & edged (¾” Radius) and then 2 @Kohler 2209 Caxton sink cutout will be cut in it. #
• Still looking for a saw operator/fabricator to fill our open position. #
• #leathering the 1st of 3 slabs of Nordic Black #granite for a sizable kitchen. #

Powered by Twitter Tools

• Currently we have a open position for a fabricator/saw operator. Please stop by our showroom for an application if interested. #
• Polished the edge of a Costa Esmerelda #granite vanity top. #
• Re-polished the face of the Costa Esmerelda #granite vanity top. #
• Setting up the CNC for the #leathered Belugia #limestone master vanity top. #
• Glued steel in the #honed Torreon #travertine double vanity this morning. Top spent a couple days drying out. #
• One of our guys is back from helping install the #leathered Pietra Lavica #shist kitchen. Two guys still there to finish it up. #
• Got a guy working on a tile & slab whole bathroom remodel (including Nu Heat in-floor heating system). #
• Have one guy laying a pebble mosaic bathroom floor today. We installed the slab vanities last week at the same job. #
• #Hone Gohare Beige #limestone and #honed Noche #travertine vanities ready for tomorrow morning’s install. #
• #honed Torreon #travertine tub deck is almost ready 4 tomorrow’s install. After the tub is set, we can install the matching double vanity. #
• #Polished Costa Esmerelda #granite vanity top is programmed & set up ready 4 the @Kohler 2210 Caxton sink cut-out to be run in the morning. #

Powered by Twitter Tools