New Trends in Natural Stone

• Couple guys went to finish installing #honed Red Onyx pieces & #hone Torreon #travertine tub deck splashes. #
• 2 guys R starting a kitchen tear out 2day so we can install the #honed Calcutta Eureka #marble countertops & measure for full height splash. #
• Got R #honed Rosemary @CaesarStone slabs back from @PercocoSFC & they look really nice with the honed finish. Thanx Nick! #

Powered by Twitter Tools

• Customer added some splash @ tub deck, so just cut some 4″ tall pieces (50″-60″ long) of 3cm #honed Torreon #travertine down to ¾” thick. #
• Flat polishing the edge on the last piece of New Venetian Gold #granite (not counting splash). This piece is left of the stove. #
• #honed Graphite #marble fireplace pieces are ready for assembly tomorrow. #

Powered by Twitter Tools

• Cutting a crystallized glass slab for a vanity display and samples. #
• Finished cutting the #leathered Botticino Chroma kitchen this morning, now leathering the edges. #
• Programmed a DecoLav cut out in a 2cm Juperana Columbo #granite vanity with a 4cm FBN edge. #
• Programming the Julien 003919 sink cut-out in the #leathered Botticino Chroma. #
• Cutting some more pieces of Polar White #marble #
• Working on a #honed Torreon #travertine & #honed Red Onyx tub face. #

Powered by Twitter Tools

• Got a couple of installs today – 1st R the honed Torreon #travertine vanity & honed Red Onyx curb & jamb pcs. #
• 2nd (install) is a Polar White #marble curb, jamb & casing pieces. #
• Just got the faucet info 4 the Minerva @SilestoneUSA vanity & Calcutta Gold #marble vanity. Both counter tops get @Kohler Caxton 2210 sinks. #
• One of our fabricators is working on finishing the 2cm Infinty @Durcon_Inc kitchen counter tops. #
• Just received a slab of vein cut polished Torreon #travertine from @ArizonaTile for a job we are doing in Evergreen. #

Powered by Twitter Tools

• Cutting #leathered Ubatuba #granite for another package kitchen -> http://t.co/i7yXLa0 #
• Running Noche vanity with 2 @Kohler 2209 Caxton sink cutouts. #
• Working on shop drawings for #honed Red Onyx shower jamb pieces and shower wall center piece. #
• #leathering 2nd of 3 slabs of Nordic Black #granite #
• #leathering 3rd of 3 slabs of Nordic Black #granite #
• #leathering the edges on the Ubatuba slab package kitchen as the pieces are coming off the saw. #
• Re-polished a piece of 2cm Calcutta Gold #marble for a wedding cake platter. #
• Just ran 2cm Calcutta Gold #marble wedding cake platter on CNC. Ø16″ for a Ø14″ cake. #
• Just programmed the raised peninsula top for the #leathered Ubatuba #granite slab package kitchen. #
• Running #leathered Ubatuba #granite peninsula on CNC now. Rest of job is done being cut & mostly done being edged on the Pro Edge III #
• Honed Noche #travertine double vanity is almost finished & ready for install. #

Powered by Twitter Tools

• Cut a piece of Noche #travertine Needs to be re-honed & edged (¾” Radius) and then 2 @Kohler 2209 Caxton sink cutout will be cut in it. #
• Still looking for a saw operator/fabricator to fill our open position. #
• #leathering the 1st of 3 slabs of Nordic Black #granite for a sizable kitchen. #

Powered by Twitter Tools

• Currently we have a open position for a fabricator/saw operator. Please stop by our showroom for an application if interested. #
• Polished the edge of a Costa Esmerelda #granite vanity top. #
• Re-polished the face of the Costa Esmerelda #granite vanity top. #
• Setting up the CNC for the #leathered Belugia #limestone master vanity top. #
• Glued steel in the #honed Torreon #travertine double vanity this morning. Top spent a couple days drying out. #
• One of our guys is back from helping install the #leathered Pietra Lavica #shist kitchen. Two guys still there to finish it up. #
• Got a guy working on a tile & slab whole bathroom remodel (including Nu Heat in-floor heating system). #
• Have one guy laying a pebble mosaic bathroom floor today. We installed the slab vanities last week at the same job. #
• #Hone Gohare Beige #limestone and #honed Noche #travertine vanities ready for tomorrow morning’s install. #
• #honed Torreon #travertine tub deck is almost ready 4 tomorrow’s install. After the tub is set, we can install the matching double vanity. #
• #Polished Costa Esmerelda #granite vanity top is programmed & set up ready 4 the @Kohler 2210 Caxton sink cut-out to be run in the morning. #

Powered by Twitter Tools

• Running 2 @AmercanStandard Studio 0614 under-mount sink cutouts in a #honed Torreon #travertine master vanity top w/Eased (square) edge. #
• Programming a relatively flat above-counter/wall mount sink in a #leathered Belugia #limestone vanity top. #
• Re-honed a piece of Graphite #marble for a fireplace hearth. #
• Installed a couple of tops today. One double vanity and one buffet top. #
• Re-leathered a piece of the Pietra Lavica #shist to get the finish more consistent across the two pieces that will be seamed together. #
• Getting tired of the afternoon monsoons here in Denver, how about you? #
• Re-polishing some more 18×18 Calcutta Gold Vien #marble tiles. #

Powered by Twitter Tools

• Yesterday we actually ran the @Kohler 3333, not the 3331. Now we are running the 3331 Undertone sink cut-out #leathered Pietra Lavica #shist #
• Trimming the #leathered St Marc #limestone top that has 2 shop joints in it. #
• Have a customer coming in today to layout out his 2cm Red Onyx slab. Pieces will be used in the shower (wall, curb, jambs) & tub face. #
• Setting up to run a piece of #leathered Juperana Jatoba #granite (at least that is what I think it is) on the CNC for a radiused corner. #
• Ran a Porcher semi-recessed vessel sink cutout in #honed Noche #travertine #
• Running Toto LT569 sink cutouts in #honed Gohare Beige #limestone now. #
• #leathered the edge on some #leathered Belugia #limestone pieces. #
• #leathered and cut an additional piece of Pietra Lavica #shist for the job we have been working on lately. #
• Cut some pieces of #polished Costa Esmerelda #granite this morning. #

Powered by Twitter Tools

• Programming the last piece of #leathered Pietra Lavica #shist for a @Kohler 3177 Undertone sst u/m ( http://t.co/unzVvrq ) sink cut-out. #
• Running @Kohler 3177 Undertone under-mount sink cutout in #leathered Pietra Lavica #shist counter top now. #
• Programming a Porcher semi-recessed vessel sink cutout in #honed Noche #travertine for a powder bath. #
• Just finishing the program for 2 Toto LT569 under-mount sink cutouts in #honed Gohare Beige #limestone #
• Programmed 2 @AmercanStandard Studio 0614.000 under-mount sink cut-outs in a #honed Torreon #travertine master vanity. #
• #leathering 2nd of 2 Ubatuba #granite slabs for a kitchen. #
• Fabricating a shower niche box out of 2cm Polar White #marble #
• Putting the finishing touches on the #honed Calcutta Eureka #marble kitchen counter tops with the Italian edge detail. #
• Working on the design 4 a vanity w/integrated sink made from a 10″ thick block of White Carrara #marble w/slab cladding over a metal frame. #

Powered by Twitter Tools