New Trends in Natural Stone

• 2 guys R installing #honed Rosemary @CaesarStone window sills & splash & 2 guys R working on the #Tuscan Ubatuba #granite fireplace install. #

Powered by Twitter Tools

• Cut a shower seat out of #honed Cotton White #Chroma Once it is set & more tile work is complete, the rest of the shower pc can B measured. #
• 2 pcs of the #Tuscan Ubatuba #granite are re-cut & ready for install. #
• Cutting some Polar White #marble window casings. #
• Working on finishing some #honed Rosemary @CaesarStone splashes & window sills. #
• Working on a #leathered Crema Bordeaux #granite outdoor BBQ. #
• Drawing the shop ticket for a #leathered Cafe Imperial BBQ with a Chiseled (snapped) edge. #
• Installed the #honed Cotton White #Chroma shower seat in Evergreen this morning. #
• Installing #honed #marble splashes right now to finish off a job. Splashes are in the kitchen, pantry, laundry & master bath. #
• Loading up the last pcs of the #Tuscan Ubatuba #granite fireplace. Will get some more pieces set today. Splashes 2 install there tomorrow 2. #

Powered by Twitter Tools

• Finished doing the Quirk Miters on the #Tuscan Ubatuba #granite but found out 2 pieces were not correctly dimensioned & need 2 B re-cut. #
• Finishing some #honed Calcutta Gold, #honed Calcutta Supreme & #honed Graphite #marble splashes for install tomorrow. #
• Working on some #honed Rosemary @CaesarStone splashes for install on Wednesday. #

Powered by Twitter Tools

• Drilled holes in threshold for locating pins to locate door frame. #

Powered by Twitter Tools

• Found (for the moment) the problem with R CNC machine. Hopefully it is not indicative of a larger problem though. #
• Installing the Emperador Dark #marble master bath. 3 countertops, a tub deck & shower seat. Tub deck & vanities have an OG Bullnose edge. #
• Running the cooktop cutout piece of #leathered Nordic Black #granite #
• Got the #honed Rosemary @CaesarStone entry threshold (8′ long) beveled correctly. Didn’t help that the spec changed while we were doing it. #

Powered by Twitter Tools

• Even though it has been a short week, TGIF! #
• Closing up a little early today @ 4:30pm #
• Entry (front) door threshold is almost complete. Bevel is ground and honed, just need to trim to size now. #
• #honed Calcutta Gold #marble island is off the CNC. Did an Italian edge detail & a Julien Classic Collection 3204 sst u/m sink cutout. #

Powered by Twitter Tools

• Leathering the edges on the #leathered Nordic Black #granite kitchen countertops. #
• Running some Julien Classic Collection under mount sink cutouts in #honed Rosemary @CaesarStone & #honed Calcutta Gold #marble countertops. #
• Cutting a front (entry) door threshold out of #honed Rosemary @CaesarStone #
• Just picked up some oil for the machines. #

Powered by Twitter Tools

• Trimming the 48″x20″x10½” block down to size (45″) now. Then will machine top and bottom on the CNC to finish out between 9½” & 10″ thick. #
• Running the 2nd half of the Emperado Dark #marble tub deck on the CNC now. #
• Honing the edge of the last piece of #honed Rosemary @CaesarStone for the moment. #
• Programming more sink cutouts & edges 4 the CNC. #
• Just finished honing the Calcutta Gold #marble island piece. Need to program both the sink cut-out & an Italian edge detail 4 it. #
• Cutting the #leathered Nordic Black #granite kitchen now. #

Powered by Twitter Tools

• TGIF! And a holiday (long) weekend to boot #
• Honing the edges of the Rosemary @CaesarStone countertops on our @parkindustries Pro Edge III. #
• Running the last piece of #leathered Betularie #granite on the CNC. Starting w/OG Bullnose edge, then the hammered copper u/m sink cutout. #
• 2 of the 4 polished White Carrara #marble legs are glued up today! The other two are dry fitted. #
• Pulling out one of the White Carrara #marble blocks (48″x20″10″) to be cut down to 45″x20″x10″ for a vanity top with an integrated sink. #
• Programming the Emperado Dark #marble tub deck. Will get an OG Bullnose edge to match vanities. Using 1 more tool 2 reduce hand finishing. #
• Instead of doing #FF I’m doing #FridayThankYous So thanks 2 R new followers @ChoosePrecision @wpfreelance @CoSpringsReview @realstonellc #
• A few guys just spent the last two days unloading 16×16 & 18×18 tiles & supplies @ a job site. Ready to start working on this bathroom! #
• Have a great Labor Day weekend everyone. We will be back on Tuesday #

Powered by Twitter Tools

• Cutting #honed Rosemary @CaesarStone slabs for a kitchen. #
• troubleshooting R vacuum lifter. Only got a couple more things to check… #

Powered by Twitter Tools