New Trends in Natural Stone

• TGIF! #
• Made some medicine cabinets but they didn’t come out right, so we R doing them again. #WeAllMakeMistakes It is unfortunate but that is life. #
• Setting up for the #honed Cotton White #Chroma curved shower wall cap on the CNC. #
• Finishing the fabrication of a #leathered Absolute Black #granite shower shampoo niche box. This is for one of R bathrooms @ R showroom. #

Powered by Twitter Tools

• Doing another template today. #
• Negro Marquina #marble fireplace is ready for install. #
• Hand finishing the #honed White Peracima #granite kitchen counter tops. The edges are Eased & Honed. Also has 4″ splash. #
• Cutting some more pieces out of #honed Cotton White #Chroma #
• Gluing together some mitered splashes for the #honed White Peracima #granite kitchen. #
• Just programmed a #honed Cotton White #Chroma curved shower wall cap. #

Powered by Twitter Tools

• Cut a shower seat out of #honed Cotton White #Chroma Once it is set & more tile work is complete, the rest of the shower pc can B measured. #
• 2 pcs of the #Tuscan Ubatuba #granite are re-cut & ready for install. #
• Cutting some Polar White #marble window casings. #
• Working on finishing some #honed Rosemary @CaesarStone splashes & window sills. #
• Working on a #leathered Crema Bordeaux #granite outdoor BBQ. #
• Drawing the shop ticket for a #leathered Cafe Imperial BBQ with a Chiseled (snapped) edge. #
• Installed the #honed Cotton White #Chroma shower seat in Evergreen this morning. #
• Installing #honed #marble splashes right now to finish off a job. Splashes are in the kitchen, pantry, laundry & master bath. #
• Loading up the last pcs of the #Tuscan Ubatuba #granite fireplace. Will get some more pieces set today. Splashes 2 install there tomorrow 2. #

Powered by Twitter Tools

• Running Polar White #marble tub deck on CNC now for Italian edge detail and under-mount tub cutout. #
• Running the Santa Fe Tan #Chroma vanities on the CNC now. #
• Honing a 2cm Statuary Vein #marble vanity. #
• Running the 2cm Statuary Vein #marble vanity on the CNC for a 4cm Italian edge & 2 @Kohler 2882 Verticyl rectangle under-mount sink cutouts. #

Powered by Twitter Tools

• Got the White Carrara #marble block rolled over. Just finished measuring it so I can program how much to take off the top. #
• Another big install this morning. It will take 4 guys to get some of the pieces in the house & in place. #
• Block is off the CNC and on the radial arm polisher now. Will be running 2 pieces of Original Pennsylvania soapstone on the CNC after lunch. #
• Large Penn. soapstone island is on the CNC now for the curved seating area as well as the cooktop cutout. Edge is an Ease & Hone. #
• Almost done polishing, correction just finished the edges of the Santa Fe Tan #Chroma on R @parkindustries Pro Edge III. #
• Finished cutting the recycled glass samples & returning the saw to it’s normal RPMs (by switching the pulley back). #

Powered by Twitter Tools

• Re-honing a piece of Calcutta Gold #marble Luckily we caught it before we installed it. #
• Making slow progress on the block… At least it is progress. #
• Ready to flip the block (ok more like roll) over tomorrow & gauge the top. Then on to the polisher. #
• Cut some vanities & shower seats out of Santa Fe Tan #Chroma #
• Cutting samples of a recycled glass product. Had to change the pulley to increase the RPMs to cut it decently. Its slow, but nice clean cut. #

Powered by Twitter Tools

• Programming some pieces of @DuPont_News Cloud White #Zodiac for both @Kohler Caxton 2210 sinks & a Dupont edge detail. #
• Re-polishing the Polar White #marble vanities & tub deck. #
• Installing 1 of the New Venetian Gold #granite slab package kitchens today. #
• Working on finishing up the pieces of Mesa #Chroma & #leathered Brownie #granite 4 install tomorrow. #
• Unloading 6 slabs from The Stone Collection. Including 1 of Creme Bordeaux #granite that we need to #leather #
• Still programming pieces of @DuPont_News Cloud White #Zodiac Got 1 pc ready to come off the CNC any minute. #
• Leathering a slab of Crema Bordeaux #granite right now. #

Powered by Twitter Tools

• Running the #leathered Brownie #granite lower island with the cook-top cutout on the CNC now. #
• Polishing the edge of a piece of @DuPont_News Cloud White #Zodiac (engineered stone). #
• Leathering the straight edges of the #leathered Brownie #granite upper island sitting bar on R @parkindustries Pro Edge III. #
• Hand finishing the Mesa #Chroma kitchen counter tops. #
• Programming a RonBow 200520 under mount sink cutout in the Cotton White #Chroma master bath vanity. #
• Making vinyl templates for a job right now. #
• Running the @DuPont_News Cotton White #Zodiac master vanity sink cut-outs now. #
• #leathered St Laurant #marble master vanity got run on the CNC for Lacava 5451 Cube under mount sinks. #

Powered by Twitter Tools

• Installing the #leathered Nordic Black #granite kitchen countertops today. #
• Working on the New Venetian Gold #granite countertops that will be installed on Thursday. #
• Running the Mesa #Chroma kitchen sink cutout. It is a @blancoamerica 441296 Silgranite Precis 1-3/4 bowl undermount sink. #

Powered by Twitter Tools

• Steel frame for White Carrara #marble block vanity got welded up this weekend. #
• Just finished honing the backside & leathering the top side of a Nordic Black #granite upper bar piece that has a shop joint in it. #
• Finishing up polishing the edges on the Mesa #Chroma counter tops. #
• Cutting some 2cm & 3cm Polar White #marble vanites. #
• Hand leathering the curved edge of the #leathered Nordic Black #granite island. #
• Is it appropriate for me to thank myself for the #ff from my personal account (@4t7ford)? #
• Running the 2nd (of 2) New Venetian Gold #granite slab package sink cutout on our CNC now. #
• Polished the edges of some Cotton White #Chroma counter tops. #
• Honed the underneath of the #leathered Brownie #granite upper bar top. #
• Cut the Cloud White #Zodiac (a @DuPont_News engineered stone) counters. #

Powered by Twitter Tools