Subscribe
1280 W Bayaud Ave
Denver, CO 80223
303.733.3013

27 April 2012

Twitter Updates for 2012-04-27

  • #FF @McCawMedia She’s new to twitter, and a darn good web designer, graphic designer, photographer & friend. #
  • Percoco Marble Daily Twitter News is out! http://t.co/rIVqslfp ▸ Top stories today via @delightbydesign @tilemagazine #
  • Cutting a kitchen out of Golden Beaches granite. #
  • Please +K my influence in Construction on @klout http://t.co/8BoMyaZa #
  • I gave @LisaBarone +K about Social Media on @klout http://t.co/E90AnTpW #
  • I think everyone probably could use as least one of these in each room of their house -> http://t.co/VDVSiwF7 #
  • Went to pick-up some sinks (@kohler Caxton 2209s) but the warehouse was closed for inventory today. #
  • Flat polishing the edges of the Golden Beaches granite countertops on R @ParkIndustries Pro Edge III #

Powered by Twitter Tools

20 April 2012

Twitter Updates for 2012-04-20

Filed under: Production Updates — Tags: , , , , , , , — Mike Michaelson @ 23:55 MDT

Powered by Twitter Tools

13 April 2012

Twitter Updates for 2012-04-13

Filed under: Production Updates — Tags: , , , , , , , , — Mike Michaelson @ 23:55 MDT
  • Thank you to R recent followers (#ThankYouThursday a day late) @good_question @kutchenhaus @healthyheating @Impactbnd @KrysiDiaz #
  • #ThankYouThursday a day late (cont) – @TomBrassell @MistoneKitchens @Denver_Spa @AffinityDesignC @CraftHuntersCOM @ThePerfectBath #
  • #FF @HubSpot for SEO, Inbound Marketing, social media & other assorted web related advice. #
  • Percoco Marble Daily Twitter News is out! http://t.co/rIVqslfp ▸ Top stories today via @modernindenver @cooper_stone @asiddesigners #
  • TGIF! #
  • Running another @Kohler Caxton 2209 undermount sink cutout in a Green Onyx master bath vanity countertop. #
  • Running a Ø36″ table on the CNC, the material is 3cm Golden Fantasy granite. #
  • Polishing the backside of a piece of Golden Fantasy granite. #
  • Just finished programming & setting up for a cooktop cutout in Golden Fantasy granite island. Will run it 1st thing Monday morning. #

Powered by Twitter Tools

23 March 2012

Twitter Updates for 2012-03-23

  • TGIF! Do you have weekend plans? #
  • #FF @LisaBarone – she writes some helpful (& thought provoking) stuff on #SEO & #webDesign #
  • #FF @WSJ (Do I really need to say anymore?) #
  • I received +K in photography from @granitecitytool, thanks! http://t.co/XIOd6wbf #
  • My @Klout score is 28. I improved it by 2 points over the past 30 days! http://t.co/7ps9j9vz #
  • I just completed the Adding Topics quest on @klout. Join me: http://t.co/oao9qF9Z #
  • Running the L-shaped kitchen countertop of 3cm Sucuri granite on the CNC for a Full Radius edge (aka Waterfall) -> http://t.co/pgkv5owE #
  • Just received the April issue of @CO_HomesMag. So excited by some of the new ideas and lines. #
  • Running the Sucuri granite island on the CNC now. 1st the edge, then the sink cutout 4 an @EclipseSinks Francisco 512 u/m sst sink. #
  • #FF @ColoradoDOT for all your CO road info (this can be actually helpful). #
  • #FF @CambriaQuartz our rep was just here yesterday! #
  • The Sucuri granite island edge is shaped, working on the @EclipesSinks 512 Francisco sst sink cutout now. #
  • The Magma Supreme granite buffet top is programmed. It is getting an Italian edge detail. #
  • The Sucuri granite laundry top is programmed for a drop-in (self-rimming) sink & carbon fiber reinforced fiberglass rod reinforcement cuts. #
  • Just spoke with Heather @ChrisShowroom about some potential sinks for a customer. She was quite helpful! Thanks Heather! #

Powered by Twitter Tools

16 March 2012

Twitter Updates for 2012-03-16

  • TGIF! It feels like it has been a long week. #
  • TY for the #FF @granitecitytool #
  • Just finished updating our Stone Furniture gallery -> http://t.co/7jA80gdh & tweaked the colors in our CSS. #webDesign #SEO #graphicDesign #
  • Cutting a slab of Labrador Antique. #
  • One of our templates for today cancelled. Doing the other one now. #
  • Waiting on a sink and faucet that should be here Monday for the @CSGranite job. #
  • Continuing to work with a customer on the design of his mausoleum. #

Powered by Twitter Tools

4 November 2011

Twitter Updates for 2011-11-04

  • Polishing the edges of the Juperana Santa Ceceilia #granite island & desk pcs on R @parkindustries Pro Edge III #
  • Working on building Polar White #marble medicine cabinets for a master bath. #
  • Finishing the install we started yesterday in Niwot. Still have a few more pieces to measure for that job too. #
  • Drawing up some Black Absolute stair treads & risers. Risers will be polished, but treads will have a bush hammered finish (anti-slip). #
  • TGIF! Also “Thank you” to our new followers @SFA_Stone @Nuheat_Ind @design_decore @SymbolSink @stonerepairs #FF #
  • Updated the http://t.co/3PYjorLs website with certified fabricators, consumer info & sponsors. Check it out if you R looking 4 a fabricator. #
  • #leathering a second piece of Cafe Imperial #granite for an outdoor BBQ. #

Powered by Twitter Tools

19 September 2011

Twitter Updates for 2011-09-19

  • Steel frame for White Carrara #marble block vanity got welded up this weekend. #
  • Just finished honing the backside & leathering the top side of a Nordic Black #granite upper bar piece that has a shop joint in it. #
  • Finishing up polishing the edges on the Mesa #Chroma counter tops. #
  • Cutting some 2cm & 3cm Polar White #marble vanites. #
  • Hand leathering the curved edge of the #leathered Nordic Black #granite island. #
  • Is it appropriate for me to thank myself for the #ff from my personal account (@4t7ford)? #
  • Running the 2nd (of 2) New Venetian Gold #granite slab package sink cutout on our CNC now. #
  • Polished the edges of some Cotton White #Chroma counter tops. #
  • Honed the underneath of the #leathered Brownie #granite upper bar top. #
  • Cut the Cloud White #Zodiac (a @DuPont_News engineered stone) counters. #

Powered by Twitter Tools

2 September 2011

Twitter Updates for 2011-09-02

  • TGIF! And a holiday (long) weekend to boot :) #
  • Honing the edges of the Rosemary @CaesarStone countertops on our @parkindustries Pro Edge III. #
  • Running the last piece of #leathered Betularie #granite on the CNC. Starting w/OG Bullnose edge, then the hammered copper u/m sink cutout. #
  • 2 of the 4 polished White Carrara #marble legs are glued up today! The other two are dry fitted. #
  • Pulling out one of the White Carrara #marble blocks (48″x20″10″) to be cut down to 45″x20″x10″ for a vanity top with an integrated sink. #
  • Programming the Emperado Dark #marble tub deck. Will get an OG Bullnose edge to match vanities. Using 1 more tool 2 reduce hand finishing. #
  • Instead of doing #FF I’m doing #FridayThankYous So thanks 2 R new followers @ChoosePrecision @wpfreelance @CoSpringsReview @realstonellc :) #
  • A few guys just spent the last two days unloading 16×16 & 18×18 tiles & supplies @ a job site. Ready to start working on this bathroom! #
  • Have a great Labor Day weekend everyone. We will be back on Tuesday :) #

Powered by Twitter Tools

26 August 2011

Twitter Updates for 2011-08-26

Filed under: Production Updates — Tags: , , , , , , , , — Mike Michaelson @ 22:30 MDT
  • TGIF! #FF @EclipseSinks they supply us with an awesome product and have a decent blog too ;) #
  • #FF @LisaBarone for some interesting (amusing) tweets and helpful blog articles. #
  • #FF @Denver_Broncos for all your Denver Bronco’s news, this is Denver after all ;) #
  • Also a thanks to all our new followers this week! #
  • Been a crazy day so far. Only got one piece run on the CNC so far. Been dealing with an emergency… #
  • Cut the #leathered Black Absolute #granite wet bar this morning. #
  • Cutting the 2nd slab of Emperado Dark #marble for a tub deck. 1st slab was for the vanities. More OG Bullnose edge work for the CNC. #

Powered by Twitter Tools

12 August 2011

Twitter Updates for 2011-08-12

Filed under: Production Updates — Tags: , , , , , , , , , — Mike Michaelson @ 23:30 MDT
  • Installing the #honed Calcutta Eureka #marble kitchen countertops with an Italian edge today. Then we can measure for full height splashes. #
  • Had one template yesterday & another today. With the new guy starting Monday hoping to get into a steady rhythm. #
  • #FF @whitewashco her blog is good too! & thanks to R new followers @ColoradoRustic @ChrisShowroom @LaurelCrownCom TGIF! #

Powered by Twitter Tools

Older Posts »
Follow

Get every new post delivered to your Inbox

Join other followers:

%d bloggers like this: