New Trends in Natural Stone

• Running the 1st pc of Verde Antique marble on the CNC for the Italian edge detail. #
• Cutting the 2nd slab of Verde Antique marble for the main piece of the island. #
• Installing the tile backsplash today in the kitchen we installed the granite countertops in yesterday. #
• Hand finishing the leathered Nordic Black granite island & the honed Jura Grey limestone vanity today. #
• Continuing to program pcs of the Verde Antique marble for the Italian edge on the CNC. #
• Percoco Marble Daily Twitter News is out! http://t.co/rIVqslfp ▸ Top stories today via @kandrackole @interiordsignhq @capcotilestone #
• Cutting a Persa Blue granite fireplace surround. See pix of other fireplaces we’ve done on R website -> http://t.co/no4bb9KN #
• Running an Italian edge detail on the L-shaped countertop of the Verde Antique marble kitchen on the CNC now. #
• Had quite a few people (customers & potential customers) coming through from 11am-2pm today. Felt like a zoo @ lunch time. #
• #TYT 4 the RTs @brunibrinieri @PercocoSFC #
• #TYT 2 R newest followers @ElaineJStLouis @wtrwrks @realtyplug @ShaneInman @ZigsbysKitchen @deniwoo612 @BasaltLavaStone @KingofBigScreen #
• #TYT 2 R newest followers (cont) @twodogszk @denvercaterer #

Powered by Twitter Tools

• Leathering the edge of a leathered Nordic Black granite island on R @ParkIndustries ProEdge III. #
• Cutting out an opening in the leathered Nordic Black granite island for the slide-in cooktop/stove. #
• Percoco Marble Daily Twitter News is out! http://t.co/rIVqslfp #
• Finishing the @Kohler Ladena 2214 undermount sink cutouts in the honed Jura Grey limestone vanity. #
• Nice! Who doesn’t appreciate a “hidden” door? http://t.co/D05xd0rD #
• Cutting the 1st of 2 slabs of polished Verde Antique marble for a kitchen. It will be getting an Italian edge detail http://t.co/HehGfAkR #
• Installing a kitchen today. Slab countertops & tile backsplash. #

Powered by Twitter Tools

• Percoco Marble Daily Twitter News is out! http://t.co/rIVqslfp #
• A day late with my #ThankYouTuesday (#TYT). Thanks to R most recent followers @iCreatorsEurope @SPIREDenver @denverattract @stonecoldncn #
• A day late with my #ThankYouTuesday (#TYT). Thanks to R most recent followers (cont) @designstiles @GeorgeSmithUK @RemodelingJobs #
• Finished running all the Ogee Bullnose pieces before lunch. #
• Finished flat polishing the edge on the Lagos Blue @CaesarStoneUSA just before lunch time. #
• Almost done honing a crate full of 24″x24″ Black Absolute tiles for @PercocoSFC #
• Running the cooktop cutout in a piece of Fire Bordeaux granite now. #
• Cutting a piece limestone for a laundry room top. #

Powered by Twitter Tools

Edit: Mis-typed twitter username for CaesarStoneUSA in tweet, corrected here.

• Working on the shop drawings 4 the jobs that were templated yesterday. #
• Doing a tear-out this morning & then starting the install in the kitchen, will B back there tomorrow to finish what doesn’t get done 2day. #
• Leathering the edge detail on the leathered Bianco Antico granite kitchen countertops. #
• Honing the underside of the eating bar top for the leathered Bianco Antico granite kitchen. #
• working on programming a @blancoamerica 440068 Performa u/m sink cutout. #

Powered by Twitter Tools

• Glued the steel reinforcement in the honed London Fog quartzite piece. Will run the sink cutout as soon as the glue is dry. #
• Working on the sink cutout program for a @KohlerPR Poise 3388 sst under-mount sink cutout in a piece of @CSGranite #
• Honed London Fog quartzite laundry countertop is done on the CNC. #
• Cutting a 3cm Via Lactea (some say its Via Lattea) table. Will be milling it to 2cm & leathering it 2. It will get a ¾”x¼” beveled edge. #
• Gluing the mitered aprons on a couple pieces of Labrador Antique granite & a honed London Fog quartzite vanity. #
• Looking at what undermount sst sinks have a cutout big enough to replace an existing (what we believe is an) American Std undermount sink #

Powered by Twitter Tools

• Back down to Franktown, CO with another truck load of countertops 2 install. A 2nd island & 4 vanities. This will finish up the job. #
• Got the hose clamp I need to fix a bad water hose (trimmed off a good 10″ from the end). #
• Re-honing a couple pieces of Belgium Bluestone for some tops in Evergreen. #
• Programming the Italian edge detail on some more pieces of the Magma Supreme granite countertops. #
• Running the Franke PRX 120 under-mount sink cutout & Italian edge detail on a piece of Magma Supreme granite. #
• Cutting a leathered Finnish Soapstone kitchen. This is one of our Slab Packages -> http://t.co/mMyPsdfG #

Powered by Twitter Tools

• TGIF! #
• Running the last of the @Kohler 2339 Memoir under-counter sink cutouts now. This is a double sink honed Belugia limestone vanity. #
• Putting some reinforcing ½” sq steel tubing in the 3cm Magma Supreme granite peninsula now. #
• Installing some countertops down in Franktown, CO today. Will have another day down there (same job site) next week. #
• Polishing the backside (exposed overhang) of the seating bar portion of the Magma Supreme granite peninsula. #
• Working on programming a Franke PRX 120 sst under-mount sink cutout in the Magma Supreme granite. #

Powered by Twitter Tools

• Started the morning off with snow removal. Its a wet heavy snow. #
• Loading the install truck, while waiting for a call from the homeowner if we can even get to the house in Franktown. #StillSnowing #
• Running the Hillsboro limestone piece on the CNC for the Mirabella MIRUC309 sst under-mount sink. #
• Running the 1st of many @Kohler 2339 Memoir under-counter sink cutouts. The 1st 2 are in a honed Pietra Lavica schist double vanity. #
• Making some more vinyl templates. #
• Doing a Full Bullnose on the last piece of honed Belugia limestone. This one will get 2 @Kohler 2339 Memoir under-counter sinks. #
• Cutting some Belgium Bluestone for a job in Evergreen. #
• Hand finishing the hone Pietra Lavica schist kitchen countertops. #
• Hillsboro Limestone getting a sink cutout. http://t.co/tssa8rlH #
• http://t.co/V7rAj7AI #
• Setting-up for the 2nd honed Pietra Lavica schist vanity. This one is a single & it too is getting a @Kohler 2339 Memoirs under-mount sink. #
• Cutting the 1st of 3 slabs of Magma Supreme granite for a kitchen. These countertops will be getting an Italian edge detail. #

Powered by Twitter Tools

• Got the Pietra Lavica schist island loaded into the CNC to run the @blancoamerica 441128 under-mount sink cutout. #
• Doing a 4cm Full Bullnose edge detail on some vanity countertops of honed Belugia limestone on R @parkindustries Pro Edge III. #
• Programming a Mirabella MIRUC309 under-mount sink cutout in a piece of honed Hillsboro limestone. #

Powered by Twitter Tools

• Installed a new water flow sensor in R CNC. Hope this fixes the problem. #fingersCrossed #maintenance #
• Doing a Full Bullnose edge detail on a piece of honed Belugia limestone on R @parkindustries Pro Edge III #
• Programming a @blancoamerica 441128 sink cutout in a honed Pietra Lavica schist island countertop. #
• The revised “Block Sink Machining Process” page & slideshow just went live -> http://t.co/XYktOExj #WebDesign #SEO #gallery #pix #photos #

Powered by Twitter Tools