New Trends in Natural Stone

• Spent the morning figuring out which breakers go 2 which outlets/lights in R other building. Very few were labeled, that has been corrected. #
• Just got done changing out the burned out EXIT sign bulbs in both buildings. #
• Just finishing re-polishing the 4th crate (of 6) of 18×18 Calcutta Gold #marble tiles. #
• #Leathering the edges of a (Verde) Fuocco #granite fireplace hearth. #
• Glued the last of the 2½” mitered apron pieces on the Arrandis Gold #granite kitchen tops. Should be ready for the sink cutout tomorrow. #

Powered by Twitter Tools

• Got two ballast changed in the shop. Waiting on the back-ordered ones to arrive. #
• Ran the Kashmir White #granite vanity on the CNC. #
• Cutting pieces of Calcutta Gold #marble from @Daltile 4 a master bath vanity & make-up counter. Tops will be getting an Italian edge detail. #
• Just got done #leathering the edge on a Madura Gold #granite kitchen counter. Programing for the sink cutout now. #
• Got a piece of 3″+ thick soapstone that we are going to mill down to 3″ thick. #

Powered by Twitter Tools

• Juperana Columbo #granite BBQ piece is ready for the cnc. A couple White Carrara #marble tables should be shortly. #
• Just finishing the last piece of Juperana Columbo with a ¾” Bevel edge detail on the ProEdge, got a couple other pieces waiting their turns. #
• Just ordered some T12 electronic ballasts & bulbs for the shop & office. #
• Running 2nd White Carrara #marble table on the CNC now. This one is a ½ circle, the 1st was a full circle. #
• Bullnosing a Kashmir White #granite vanity on the ProEdge. #
• Got one ballast changed (in the office). Still need to do the ones in the shop. #
• Programming the CNC now for a Crema Marfil #marble double vanity. Has two DecoLav undermount sinks. #
• Just finishing the Crema Marfil #marble double vanity on the CNC. #
• Programmed the Kashmir White #granite vanity for the CNC, will run tomorrow. #
• A house we worked on was featured in the current issue & on the cover of “Luxe. Interior + Design” magazine ( http://prcc.us/kxZiMi ). #

Powered by Twitter Tools

• Friday we replaced 41 8′ T12 bulbs in both shops and cleaned & re-used 11 8′ T12 bulbs. Things are a LOT brighter now #
• Programming an Azul Macauba #marble vanity & sculpted splash for sink cutout and edge details – Italian (on vanity) and OG (on splash). #
• #leathered the edge of another pc of Azul Macauba for another vanity. #
• Templated a Golden Beach #granite vanity today. Programmed the Azul Macauba #marble vanities and splash. #
• Worked on hand finishing the @CambriaQuartz #CherryBrook counter tops. #

Powered by Twitter Tools

One of our sink and faucet vendors (Eclipse Stainless) just posted a new article on their blog about how to light up your kitchen. They cover the different types of lighting and how they should be used depending on how you plan to use your kitchen, whether it be primarily for entertaining or for cooking. Additionally they have other articles about design as well as about sink and faucets.

Total Eclipse Sink package with 2 possible faucet options