Subscribe
1280 W Bayaud Ave
Denver, CO 80223
303.733.3013

22 September 2016

Twitter Digest for 2016-09-21

Filed under: Production Updates — Tags: , , , , , , , , — Mike Michaelson @ 00:03 MDT

8 June 2016

Twitter Digest for 2016-06-07

Filed under: Production Updates — Tags: , , , , , , , , , , — Mike Michaelson @ 00:58 MDT

17 May 2016

Twitter Digest for 2016-05-16

Filed under: Production Updates — Tags: , , , , , , , , , — Mike Michaelson @ 00:55 MDT

13 May 2016

Twitter Digest for 2016-05-12

Filed under: Production Updates — Tags: , , , , , , , — Mike Michaelson @ 00:55 MDT

7 May 2016

Twitter Digest for 2016-05-06

Filed under: Production Updates — Tags: , , , , , , , , , , — Mike Michaelson @ 00:02 MDT
  • Percoco Marble Daily Twitter News is out! https://t.co/wJ8ogEFvEs Stories via @BuckinghamID @dailycamera @SHUEDA ->
  • TGIF! Back to milling the 3cm Emperess Green marble slabs down to 2cm. On slab 8 of 11 now. -mm ->
  • Finishing cutting the leathered Black Absolute granite kitchen while starting to leather the edges on the pieces cut yesterday. -mm ->
  • Setting up to glue the build-ups on the Ella @CambriaQuartz island that is getting a 6cm Eased edge & flush cooktop (recessed into the top). ->

6 May 2016

Twitter Digest for 2016-05-05

  • Percoco Marble Daily Twitter News is out! https://t.co/GCQoLCXHi4 Stories via @HomeAdore @ASID @luxemag ->
  • Doing the rare joint thru an under-mount sink cutout on a Ella @CambriaQuartz L-shaped perimeter counter. Island gets a flush cooktop. -mm ->
  • Working on the 4th iteration of a small vanity. Contractor broke the first 1, 2nd & 3rd broke on the CNC. Hoping 4th time’s the charm… -mm ->
  • Hand finishing the 6cm leathered White Macabus curved entry table top. -mm ->
  • Installing the leathered Solarius BBQ tops today. -mm ->
  • Cutting a leathered Black Absolute granite kitchen. -mm ->
  • Some neat faucets… https://t.co/pMGFc1wXj2 ->

5 May 2016

Twitter Digest for 2016-05-04

Filed under: Production Updates — Tags: , , , , , , , , , , — Mike Michaelson @ 00:55 MDT
  • Percoco Marble Daily Twitter News is out! https://t.co/fOVsnVhGBM Stories via @KitchAnn_Style @houseplansllc @jacelarson ->
  • Running the 6cm Dupont edge on the Solarius granite BBQ pieces we need to install by Friday… Quick turn around. Luckily it’s just 3pcs 🙂 ->
  • 7 of 11 slabs of Emperess Green marble milled down from 3cm to 2cm. 1.89 cu ft of material removed from each slab. ‘Glassing them as we go. ->
  • Running the curved entry table with a 6cm Eased edge on the CNC right now. Got a few other tops to run, then back to milling the slabs. -mm ->

4 May 2016

Twitter Digest for 2016-05-03

Filed under: Production Updates — Tags: , , , , , , , , , , — Mike Michaelson @ 00:55 MDT
  • Percoco Marble Daily Twitter News is out! https://t.co/GDAsPoDc3x Stories via @HomeAdore @grainger @Polycor ->
  • Re-cut a vanity that the contractor broke last week (transporting it). -mm ->
  • Programming the 6cm Dupont edge detail on a leathered Solarius granite BBQ counter. -mm ->
  • Cutting a slab of Titanium into “tiles”. -mm ->
  • Homeowner dropped off a sink for their vanity. Opened the box to find the @Kohler Caxton 2210 in about 5 or 6 pcs. Outside of box looked ok. ->
  • Programmed the leathered White Macabus curved entry table (6cm eased edge). -mm ->

3 May 2016

Twitter Digest for 2016-05-02

Filed under: Production Updates — Tags: , , , , — Mike Michaelson @ 00:55 MDT
  • Percoco Marble Daily Twitter News is out! https://t.co/4kzV8i8AI6 Stories via @KitchAnn_Style @luxemag ->
  • Monday morning and starting to mill (from 3cm to 2cm) the 5th of 11 slabs of Emperess Green marble. -mm ->
  • Trying to get this Onyx table inset to match the table frame that is a little out of square. 🙁 -mm ->

28 April 2016

Twitter Digest for 2016-04-27

Filed under: Production Updates — Tags: , , , , , , , , , — Mike Michaelson @ 00:56 MDT
  • Percoco Marble Daily Twitter News is out! https://t.co/urSxSRNmCo Stories via @KitchAnn_Style @denverbusiness @architectmag ->
  • Just finishing up a ¾” Bevel on some Shitake Pental kitchen pieces. Doing the peninsula now & then just some hand finishing to do. -mm ->
  • Running the 2nd of 11 slabs of Empress Green marble (milling from 3cm down to 2cm) and got our run time down by about 30% from the 1st slab. ->
  • I mis-tweeted earlier. The Shitake that we are fabricating is a @Caesarstone not a Pental product. Oops. -mm ->
  • 3rd slab of Emperess Green marble has a very hard spot in 1 corner. Really slowing things down. Hopefully it’s the only slab like this. -mm ->
  • Programming an @AmericaStandard sink cutout in the Fossil Stone vanity top. -mm ->
Older Posts »
Follow

Get every new post delivered to your Inbox

Join other followers: