Subscribe
1280 W Bayaud Ave
Denver, CO 80223
303.733.3013

10 May 2013

Twitter Digest for 2013-05-09

Filed under: Production Updates — Tags: , , , , , , , — Mike Michaelson @ 00:28 MDT
  • Percoco Marble Daily Twitter News is out! http://t.co/9ccRUMtlLx ▸ Top stories today via @jeffreydesigner ->
  • #ThankYouThursday to our newest followers @DiamondToolZone @sinkhelp ->
  • Finished running the OG edge on all the pieces of Super White marble (dolomite?). -mm ->
  • Hand finishing the Double Bevel edge detail on the Picture Stone granite & finishing the program for a @EclipseSinks D801R sink cutout. -mm ->
  • Did a quick slab layout with a customer in the dry spell between rain showers this afternoon. -mm ->
  • Met with a photographer this morning about the “Designer Finishes” brochure we are going to put together for @PercocoSFC -mm ->

9 May 2013

Twitter Digest for 2013-05-08

Filed under: Production Updates — Tags: , , , , , , , , — Mike Michaelson @ 00:16 MDT
  • Working on new sample boards for @PercocoSFC for the Designer Finishes. http://t.co/ZYXBuvpPuH Also will be doing a new brochure soon. -mm ->
  • Re-polishing a piece of Picture Stone. -mm ->
  • Getting ready to run the honed Super White marble island. It is getting an OG edge. http://t.co/xkHbGFj8iN -mm ->
  • Percoco Marble Daily Twitter News is out! http://t.co/9ccRUMtlLx ▸ Top stories today via @roomsketcher ->
  • Testing working with 6mm thick porcelain “slabs” (sheets). Cuts well at hi speed w/granite bit. Having difficulties with drilling holes. -mm ->
  • Cut some Netuno Gold granite kitchen counters earlier. Looks like Crema Bordeaux but with some additional light gold veining. -mm ->
  • Cutting some more Statuario marble tops for a job up in Boulder. -mm ->

31 January 2012

Twitter Updates for 2012-01-31

Filed under: Production Updates — Tags: , , , , , , , — Mike Michaelson @ 23:55 MDT
  • Cut a piece of Tan Brown #granite this morning, now polishing the edge on the @parkindustries Pro Edge III. #
  • Re-polished a piece of Calcutta Gold #marble for a table. Will be putting it on the CNC shortly for a OG Bullnose edge detail. #
  • Got a pile of returned flyers for @PercocoSFC St. Valentine’s special. #
  • Getting ready to leather a limestone slab… #

Powered by Twitter Tools

25 January 2012

Twitter Updates for 2012-01-25

Filed under: Production Updates — Tags: , , , , , , , — Mike Michaelson @ 23:55 MDT
  • 2 guys R headed back to Evergreen. Got a wine room (#leathered Cambrian Black #granite with a Chiseled edge) and some smaller misc pieces. #
  • Running the #leathered Betularie #granite powder vanity on the CNC. Finished the OG Bullnose edge, now doing the @Kohler Caxton 2209 cutout. #
  • Got a new 1st position Z profile (flat) tool today. Need to send out the 2nd & 3rd positions to get trued up now. #
  • Got the invites 2 the 1st Members Meeting (this 1 is open 2 anyone in the industry) of the Rocky Mountain Stone Association ready 2 mail. #

Powered by Twitter Tools

23 January 2012

Twitter Updates for 2012-01-23

Filed under: Production Updates — Tags: , , , , , , , , — Mike Michaelson @ 23:55 MDT
  • Working on some thing 4 the 1st Rocky Mountain Stone Association Member’s Meeting. This meeting will B open 2 the industry not just members. #
  • #leathering & cutting some 2cm #granite to make some 20″ lazy susans for @Daltile Denver showroom re-opening. #
  • 2 guys are up in Evergreen again. Still working on the #limestone stair treads & risers. #
  • Still working on merging some mailing lists for the Rocky Mountain Stone Association. #

Powered by Twitter Tools

20 January 2012

Twitter Updates for 2012-01-20

Filed under: Production Updates — Tags: , , , , — Mike Michaelson @ 23:55 MDT
  • 3 guys are off to install the Brown Sucuri #granite kitchen countertops today. #
  • Almost done with the mailing list additions for @PercocoSFC #

Powered by Twitter Tools

19 January 2012

Twitter Updates for 2012-01-19

  • Just finished running the 2nd #honed Verda Maritaka #granite vanity with a @Kohler 2824 Serif cast iron under mount sink cutout. #
  • Setting up to run on the CNC a piece of Rain Forest Brown #marble vanity with a curved front & a hole for a vessel sink. #
  • Cutting a fireplace hearth out of #polished Calcutta Gold Supreme #marble Will measure & cut the surround after the hearth is set. #
  • 4 guys R up in Evergreen installing a multi-tier #honed Calcutta Eureka #marble island & more #limestone stair treads & risers. #
  • I think I forgot to mention that the Rain Forest Brown is #leathered The leather finish is really nice on both the Brown & the Green. #
  • Working on a mailing list for @PercocoSFC flyer we will be sending out. #

Powered by Twitter Tools

13 October 2011

Twitter Updates for 2011-10-13

  • Honed the back side (bottom) of a #leathered Black Absolute #granite upper bar top. #
  • Polished the backside (exposed bottom) of the eating area on a peninsula countertop piece of White Spring #granite #
  • Cut the #honed Graphite #marble laundry tops. #
  • Setting up to run the White Springs #granite peninsula counter top on the CNC. #
  • Still working on the tile & slab job in the “Fire-tower” on Mt Falcon. #
  • Tweaking a few pictures for an @ASID ad we are placing in their directory. #
  • leathering the edge of the #leathered Black Absolute #granite upper bar countertop on R @parkindustries Pro Edge III. #
  • Hand finishing some #honed Calcutta Gold #marble countertops. #
  • Here is a pic of the White Spring #granite peninsula. http://t.co/pEvVhwl4 #
  • Sink section of the White Spring #granite countertops is on the CNC for a @blancoamerica 441297 sink cutout. #
  • Flat polishing the edges of the rest of the White Spring #granite counter tops. #
  • Hand finishing a Nordic Black #granite & Azul [Imperial] #granite vanity. #
  • Working on getting some parts ordered 4 a bush hammer plate 4 @PercocoSFC #

Powered by Twitter Tools

12 October 2011

Twitter Updates for 2011-10-12

Filed under: Production Updates — Tags: , , , , , , , , — Mike Michaelson @ 22:30 MDT
  • Working on programming a few countertops for sink cutouts & edge details. #
  • Guys are getting ready to install a fireplace surround as well as a couple vanities today. #
  • Nordic Black #granite vanity is off the CNC now. Just waiting for a little hand finishing. #
  • Honing the last piece of Graphite #marble for some laundry room countertops. #
  • The day is flying by and I’ve still got a lot to do. Working on a new ad design that needs to be done by Friday 2 top it all off. #marketing #

Powered by Twitter Tools

29 July 2011

Twitter Updates for 2011-07-29

  • Installing the 2cm Infinity @DurconElements kitchen counter tops today. Has a matching @Durcon_Inc U-63E Black Onyx under mount sink. #
  • Thanks to our some of our latest followers: @soarecostruzion @belmarwasbi @LaurelCrownCom @PlanetGraniteCO @EverpureWater @submitexpress :) #
  • Had a good time @thenkba meeting @ Capco last night. Had the @PercocoSFC booth set-up along w/brochures, postcards & of course R samples. #
  • Just finished with a customer going over R mock-up of the polished White Carrara #marble block vanity we R going to create for her. #
  • Received 7 more slabs today. 2 #honed Calcutta Eureka #marble 3 #leathered Cambrian Black,1 Verde Maritaka & 1 Seafoam Green #granite #

Powered by Twitter Tools

Older Posts »
Follow

Get every new post delivered to your Inbox

Join other followers:

%d bloggers like this: