New Trends in Natural Stone

• Back down to Franktown, CO with another truck load of countertops 2 install. A 2nd island & 4 vanities. This will finish up the job. #
• Got the hose clamp I need to fix a bad water hose (trimmed off a good 10″ from the end). #
• Re-honing a couple pieces of Belgium Bluestone for some tops in Evergreen. #
• Programming the Italian edge detail on some more pieces of the Magma Supreme granite countertops. #
• Running the Franke PRX 120 under-mount sink cutout & Italian edge detail on a piece of Magma Supreme granite. #
• Cutting a leathered Finnish Soapstone kitchen. This is one of our Slab Packages -> http://t.co/mMyPsdfG #

Powered by Twitter Tools

• Programming some pieces of @DuPont_News Cloud White #Zodiac for both @Kohler Caxton 2210 sinks & a Dupont edge detail. #
• Re-polishing the Polar White #marble vanities & tub deck. #
• Installing 1 of the New Venetian Gold #granite slab package kitchens today. #
• Working on finishing up the pieces of Mesa #Chroma & #leathered Brownie #granite 4 install tomorrow. #
• Unloading 6 slabs from The Stone Collection. Including 1 of Creme Bordeaux #granite that we need to #leather #
• Still programming pieces of @DuPont_News Cloud White #Zodiac Got 1 pc ready to come off the CNC any minute. #
• Leathering a slab of Crema Bordeaux #granite right now. #

Powered by Twitter Tools

• Steel frame for White Carrara #marble block vanity got welded up this weekend. #
• Just finished honing the backside & leathering the top side of a Nordic Black #granite upper bar piece that has a shop joint in it. #
• Finishing up polishing the edges on the Mesa #Chroma counter tops. #
• Cutting some 2cm & 3cm Polar White #marble vanites. #
• Hand leathering the curved edge of the #leathered Nordic Black #granite island. #
• Is it appropriate for me to thank myself for the #ff from my personal account (@4t7ford)? #
• Running the 2nd (of 2) New Venetian Gold #granite slab package sink cutout on our CNC now. #
• Polished the edges of some Cotton White #Chroma counter tops. #
• Honed the underneath of the #leathered Brownie #granite upper bar top. #
• Cut the Cloud White #Zodiac (a @DuPont_News engineered stone) counters. #

Powered by Twitter Tools

• #leathered Nordic Black #granite island is off CNC (for curved seating area) and now on R Pro Edge III to get the straight edges leathered. #
• New Venetian Gold #granite kitchen & vanity sink cut-outs R programmed & ready to run on the CNC. #
• Cutting another slab package kitchen out of New Venetian Gold #granite http://t.co/mMyPsdfG #
• Cutting polished Mesa Chroma kitchen counter tops now. Chroma is an engineered stone & Mesa is the color, in case U were wondering. #
• Working on some #leathered Emperador Dark #marble vanity & pieces 4 a master bathroom. #
• Glueing up a shop-joint for the upper pass-thru top. Material is #leathered Nordic Black #granite #

Powered by Twitter Tools

• Ordered a new water circulation pump for our CNC yesterday, should be here today. In the meantime I’ve got a few thing to program 4 the CNC. #
• Polishing the edges on the New Venetian Gold #granite slab package kitchen counters now. #
• Installing some kitchen & bath counters in Boulder. #Honed Rosemary & polished Pebble @CaesarStone, Emperador Light & Polar White #marble #
• R friends over at Boykin Pearce Associates have listed this previously commissioned piece 4 sale -> http://t.co/Jcg4BIG #
• New pump is working correctly in the CNC. Now back to work. Not that maintenance isn’t work… #

Powered by Twitter Tools

• Got 3 pieces programmed for the CNC for tomorrow. #
• Just finished the Polar White #marble vanity on the CNC, now running the Pebble @CaesarStone vanity. Same Toto LT540G under mount sinks. #
• Had a couple problems with the Emperador Light #marble countertop. Will have to re-cut it. #WeAllMakeMistakes #
• Large kitchen install today was planned to include tomorrow, but looks like they will finish it up today. #
• Just finished cutting a New Venetian Gold #granite kitchen. It is 1 of 2 of R 2 slab packages going thru right now. #
• Honing a piece of Emperado Light #marble now. #

Powered by Twitter Tools

• Programmed and ran the radius end of a kitchen peninsula in New Venetian Gold #granite #
• Polishing the edges of the sink section of New Venetian Gold #granite for one of R slab packages. #
• Programming the @EclipseSinks Diablo (Reverse) sink cut-out in the New Venetian Gold #granite countertop. #
• Running @EclipseSinks Diablo (Reverse) sink cut-out now for the New Venetian Gold #granite slab package kitchen. #
• Fabricating a window jamb/sill box. It will protrude approx ¼” past wall tile that will abutt the outside of the box. Polar White #marble #

Powered by Twitter Tools

• Thanks to our newest followers @ChrisShowroom & @KitchensPro #
• Just sent 4 slabs of @CaesarStone Rosemary to @PercocoSFC to be #honed #
• Picked up a slab of New Venetian Gold #granite from @Daltile for another slab package kitchen. #
• Working on a prospective member (fabricator) list for the RMSA: rmstoneassn.org #

Powered by Twitter Tools

• Cutting #leathered Ubatuba #granite for another package kitchen -> http://t.co/i7yXLa0 #
• Running Noche vanity with 2 @Kohler 2209 Caxton sink cutouts. #
• Working on shop drawings for #honed Red Onyx shower jamb pieces and shower wall center piece. #
• #leathering 2nd of 3 slabs of Nordic Black #granite #
• #leathering 3rd of 3 slabs of Nordic Black #granite #
• #leathering the edges on the Ubatuba slab package kitchen as the pieces are coming off the saw. #
• Re-polished a piece of 2cm Calcutta Gold #marble for a wedding cake platter. #
• Just ran 2cm Calcutta Gold #marble wedding cake platter on CNC. Ø16″ for a Ø14″ cake. #
• Just programmed the raised peninsula top for the #leathered Ubatuba #granite slab package kitchen. #
• Running #leathered Ubatuba #granite peninsula on CNC now. Rest of job is done being cut & mostly done being edged on the Pro Edge III #
• Honed Noche #travertine double vanity is almost finished & ready for install. #

Powered by Twitter Tools

• Running an @EclipseSinks Diablo 501R sink cutout in Sedna #granite kitchen top on our CNC right now. #
• #leathering a slab of Emperador Dark #marble for a fireplace. #
• Installing a Juperana Bordeaux #granite double vanity this morning. Vanity has a Full Radius edge -> http://t.co/bGEKNjT #
• Programming @Kohler 2210 Caxton sink cutouts in a Pietra de Cardoso #shist double vanity. Edge is Eased & Honed -> http://t.co/famgL1S #
• Just a quick reminder about R slab packages. We have 1 & 2 slab pkgs & they include @EclipseSinks Total Eclipse sink pkg http://t.co/i7yXLa0 #
• Installing the Bottocino #Chroma double vanity now. #
• Running Pietra de Cardoso #shist double vanity on CNC right now. #
• Hand finishing the edges on the Sedna #granite kitchen counter tops. #
• Repairing a piece of Sedna #granite & a couple pieces of Emperador Dark #marble They all separated along natural fissures. #

Powered by Twitter Tools