New Trends in Natural Stone

• Running the Seafoam Green granite “peninsula” on the CNC now. It is getting an Italian edge detail. #
• Programming more pieces of the Seafoam Green for the Italian edge detail. #
• Installing the leathered Finnish Soapstone countertops today. #
• Huge Magma Supreme island going on the CNC machine. http://t.co/li07xIdo #
• Just finished programming a @Kohler 5864-5U Cape Dory enameled cast iron under-counter sink cutout in the Seafoam Green granite. #
• Lucky came to hang out at the office today. It lead to lots of smiles and fur covered employees. http://t.co/hikWpewJ #
• Running the piece that is left of the stove with an Italian edge detail on the Seafoam Green granite. #
• Just flipped over the Magma Supreme granite peninsula to hand finish the top & trim the end that was outside the working area of the CNC. #

Powered by Twitter Tools

Edit: The picture of the Magma Supreme peninsula is of it going on the machine, but that happened on 2/29/12, on 3/1/12 it was off the CNC.

• Working on a program for a cooktop cutout & Italian edge detail on a Magma Supreme granite peninsula. #
• Just ran the 3rd pc of Magma Supreme granite with an Italian edge detail (ran 1st 2 yesterday), setting up for the 4th pc now. #
• Cutting the last 2pc of the Finnish Soapstone on the saw. #
• Stunning Magma Supreme for a kitchen countertop. http://t.co/o4nd1O5I #
• Running a @EclipseSinks Diablo 501R under-mount sink cutout in the leathered Finnish Soapstone now. #

Powered by Twitter Tools

• Back down to Franktown, CO with another truck load of countertops 2 install. A 2nd island & 4 vanities. This will finish up the job. #
• Got the hose clamp I need to fix a bad water hose (trimmed off a good 10″ from the end). #
• Re-honing a couple pieces of Belgium Bluestone for some tops in Evergreen. #
• Programming the Italian edge detail on some more pieces of the Magma Supreme granite countertops. #
• Running the Franke PRX 120 under-mount sink cutout & Italian edge detail on a piece of Magma Supreme granite. #
• Cutting a leathered Finnish Soapstone kitchen. This is one of our Slab Packages -> http://t.co/mMyPsdfG #

Powered by Twitter Tools

• Double checking the setup to run the @elkayusa ELU2115 sst under-mount sink cutout in the soapstone bar counter. #
• 3 guys left to install countertops in Evergreen. Still have more of the job being cut and worked on, as well as more to template & measure. #
• Cutting a multi-level kitchen island from 2 slabs of #honed Calcutta Eureka #marble #
• Using internal Wi-Fi to Exchange server from iPhone 4S works. Now to figure out where the @watchguardtech X10e-w is hanging things up… #
• Re-honing pieces of Calcutta Eureka #marble for a multi-level island. #
• Just finished the @elkayusa ELU1616 sst under-mount sink cutout in a piece of #leathered Antique Brown #granite for a laundry room. #

Powered by Twitter Tools

• Working on a drawing for some stair treads. Just need to mill the backside of some pieces that came from France. #
• Cutting some soapstone countertops for a basement bar. #
• Got a piece of #leathered Antique Brown #granite cut yesterday, got a @elkayusa ELU1616 undermount sst sink to program in it now. #
• Re-honing the soapstone basement bar pieces. #
• Programming a @elkayusa ELU2115 sst undermount sink 4 a basement bar with soapstone counters. #

Powered by Twitter Tools

• Finishing up the last piece of White Spring #granite on the @parkindustries Pro Edge III. Doing a Flat Polish edge. #
• Hand finishing the #honed Pietra de Serena #schist vanity. #
• Installing some vanities (Cardoso #schist & Emperado Dark #marble . #
• running a ¾” Bevel on the #honed Graphite #marble laundry top on R @parkindustries Pro Edge III #
• Cutting a outdoor BBQ top from a 3cm #leathered Crema Bordeaux #granite slab. #
• Leathering the backside of a piece of Crema Bordeaux #granite Will cut the splash & then split it. Hope it holds together after that. #
• Cutting a slab of Viara (Vyara) #granite for a kitchen. The counters will be getting a 3cm OG Bullnose edge detail. #
• Installing a #honed Original Pennsylvania #soapstone fireplace surround this afternoon. #

Powered by Twitter Tools

• Got the White Carrara #marble block rolled over. Just finished measuring it so I can program how much to take off the top. #
• Another big install this morning. It will take 4 guys to get some of the pieces in the house & in place. #
• Block is off the CNC and on the radial arm polisher now. Will be running 2 pieces of Original Pennsylvania soapstone on the CNC after lunch. #
• Large Penn. soapstone island is on the CNC now for the curved seating area as well as the cooktop cutout. Edge is an Ease & Hone. #
• Almost done polishing, correction just finished the edges of the Santa Fe Tan #Chroma on R @parkindustries Pro Edge III. #
• Finished cutting the recycled glass samples & returning the saw to it’s normal RPMs (by switching the pulley back). #

Powered by Twitter Tools

• Running the 1st of 6 pieces (kitchen perimeter & pantry) of polished Calcutta Gold Supreme #marble Doing just a Dupont edge on these pcs. #
• Running the 4th (of 6) piece of Calcutta Gold Supreme #marble on the CNC. #
• Mitering pieces of Pennsylvania Soapstone for a fireplace. #
• More plotting more templates. #
• Programming pieces of Pennsylvania Soapstone for curved edges as well as a @blancoamerica 440179 sink cutout & a cooktop. #

Powered by Twitter Tools

• Starting to program the first machining operation for the White Carrara #marble block vanity. #
• Re-honing pieces of Soapstone. #

Powered by Twitter Tools

• Running a 2cm Polar White #marble vanity with a Toto LT542G under mount sink cutout & a 4cm Italian edge detail. #
• Cutting Soapstone for a kitchen & fireplace. Just cut the island & now honing the backside (@ the eating area overhang). #
• Ran 3cm Polar White #marble vanity on CNC. It got an Italian edge detail too! #
• Programming pieces of 3cm Calcutta Gold Supreme #marble for kitchen & pantry counter tops with a Dupont edge detail. #
• Got faucet info for 3cm Polar White #marble vanity with a Dupont edge detail. Will finish that program & run on the CNC tomorrow. #

Powered by Twitter Tools