Subscribe
1280 W Bayaud Ave
Denver, CO 80223
303.733.3013

6 January 2016

Twitter Digest for 2016-01-05

Filed under: Production Updates — Tags: , , , , , , , , — Mike Michaelson @ 00:58 MDT
  • Percoco Marble Daily Twitter News is out! https://t.co/N9FVdm6pFc ->
  • Continuing to work on the curved full height onyx splash for a bar. We are doing it in 4pcs. https://t.co/QGlbpLdIvf ->
  • Trimmed some travertine fireplace header pieces for Guy’s Flooring. -mm ->
  • Hand finishing some Pietra De Cardoso (a schist) for an outdoor BBQ. There are 8pcs of stone for 4 counters (2 areas 2 levels each). -mm ->
  • Cutting some marble vanities for a sizeable job in Boulder. -mm ->

19 November 2015

Twitter Digest for 2015-11-18

Filed under: Production Updates — Tags: , , , , , , — Mike Michaelson @ 00:05 MDT

28 October 2015

Twitter Digest for 2015-10-27

Filed under: Production Updates — Tags: , , , , , , , — Mike Michaelson @ 00:05 MDT

14 May 2015

Twitter Digest for 2015-05-13

Filed under: Production Updates — Tags: , , , , , , , , — Mike Michaelson @ 00:49 MDT
  • Doing a ½” Radius edge detail on the Canyon (Pental) engineered stone counters. -mm ->
  • Hand finishing all the Ogee Bullnose edges on the Durango travertine & Crema Marfil vanity tops. -mm ->
  • Installing a few tops today. -mm ->
  • Percoco Marble Daily Twitter News is out! http://t.co/SHVtAN0Wkf ->

12 May 2015

Twitter Digest for 2015-05-11

Filed under: Production Updates — Tags: , , , , , , — Mike Michaelson @ 00:49 MDT
  • Percoco Marble Daily Twitter News is out! http://t.co/gkvCzUHZGW Stories via @LATENT_DESIGN @Lisa_D_Baer @thenkba ->
  • Running the last vanity top of the 2 slabs worth of Crema Marfil vanities. 7 tops all told. All of them get an Ogee Bullnose edge. -mm ->
  • Programmed a @wtrwrks Manchester under-mount sink cutout in two travertine vanities. Both have 2″ aprons & will sit on @wtrwrks frames. -mm ->

30 September 2014

Twitter Digest for 2014-09-29

Filed under: Production Updates — Tags: , , , , , , , , — Mike Michaelson @ 00:03 MDT

19 September 2014

Twitter Digest for 2014-09-18

  • Polishing the bottom sides of the Ubatuba granite conference table pieces. -mm ->
  • Running the 2cm Cove edge detail on the Pure White Onyx. -mm ->
  • Percoco Marble Daily Twitter News is out! http://t.co/pPr9nW17Vq Stories via @LATENT_DESIGN ->
  • Running a Full Bullnose edge on a Travertine stair nosing. -mm ->
  • Working on the leathered Rainforest Brown outdoor BBQ upper tops. -mm ->
  • Running a Full Radius edge on a granite island. -mm ->
  • Installing the Pure White Onyx splashes & wall cladding this afternoon. -mm ->
  • RT @Granite_Trans: Proud to be made in #America and support our #Veterans. Read about this Veteran Memorial here! http://t.co/dmFsmifvve ht… ->

16 July 2014

Twitter Digest for 2014-07-15

Filed under: Production Updates — Tags: , , , , , , , , — Mike Michaelson @ 00:01 MDT

9 July 2014

Twitter Digest for 2014-07-08

4 April 2014

Twitter Digest for 2014-04-03

  • Cutting a slab of Ubatuba granite for more @PercocoSFC sample boards. -mm ->
  • Got 2 more Carrara marble tops to run some sink cutouts in, then a Silver Travertine & Taj Mahal quartzite. -mm ->
  • Continuing to hand finish the Carrara marble kitchen & bath tops & splashes. -mm ->
  • Percoco Marble Daily Twitter News is out! http://t.co/pPr9nWjh9y Stories via @DesignTimes @Knoll_Inc ->
  • Got this lovely NEW Bates & Bates sink for sale. See our Craigslist ad -> http://t.co/5PtGYDEt4v -mm http://t.co/v7kKwwOKbM ->
  • Cutting the last of the @CambriaQuartz Torquay. Customer didn’t want to be without a bathroom during the remodel, so doing it in stages. -mm ->
  • Leathering & Carressing 2 of the Ubatuba granite rips for more @PercocoSFC sample boards. -mm ->
  • We’ve got 4 hand built soapstone farm style sinks for sale. See our Craigslist ad -> http://t.co/DrEM1lwMDV -mm http://t.co/qLNtWkcJAO ->
  • Need a little extra 3×6 subway tile? We’ve got 2 extra boxes (25sq ft). Left over from a job. http://t.co/kffKQaqmTr -mm ->
  • Bush hammered 2 rips of Ubatuba granite. Now doing the Tuscan finish on 1 of those. Then just need to cut everything to 6×6 for @PercocoSFC ->
  • Milled off the face of a tombstone, now setting up to re-polish it. -mm ->
  • Programming a pair of @Kohler 2297 sink cutouts for the @CambriaQuartz Torquay vanity top. -mm ->
  • Now programming a pair of @Kohler 2882 sink cutouts in the Taj Mahal quartzite vanity top. -mm ->
Older Posts »
Follow

Get every new post delivered to your Inbox

Join other followers: